Selection of boards and board accessories

For further information, please click on the item number

Ä100 Corrosive
White corrosive: approx. 100g (sodium persulphate) for engraving of boards. Sufficient for 0,5l water.

Ä200 Corrosive set, complete
Complete Corrosive set, printed wirings to the own production.

E001 Board (FR3) 160 x 100 x 1 mm
One-side copper layer 35µm. Special offer to do-it-yourself-designers of boards (FR3).

E002 Experimental board - dot grid
One-side copper layer 35µm. Hole distance 2,54 mm. Material FR2.

E003 Experimental board - strip grid
One-side copper layer 35µm. Hole distance 2,54 mm. Material FR2.

E004 Experimental board - dot grid
One-side copper layer 35µm. Hole distance 2,54 mm. Material FR4.

E005 Experimental board - strip grid
One-side copper layer 35µm. Hole distance 2,54 mm. Material FR4.

E010 Experimental board - punched
Without copper layer. Hole distance 2,54 mm. Material FR2

E011 Experimental board - strip grid
One-side copper layer 35µm. Hole distance 2,54 mm. Material FR2.

E012 Experimental board - strip grid
One-side copper layer 35µm. Hole distance 2,54 mm. Material FR2.

E013 Experimental board - 3 strip grid
The strip raster is interrupted every 3rd hole.
One-side copper layer 35µm. Hole distance 2,54 mm. Material FR2

E100 Developer
For development of photopositive coated boards.

F001 Photopositive-coated board
100 x 160 mm one-side. Copper layer: approx. 35µm. Material: FR2.

G062 Working bowl
Plastic working bowl.

L100 Conductive silver
Silver-conductive lacquer with excellent adhesive power. Ideal for repairing boards, window alarm loops and window heatings.

You are the visitor no. of this page.