M109

Step-motor-interface 6 Pin

...for controlling a 6-lane step motor (unipolar) 4...18V, max. 2 ampere. For connection to a standard AT-PC from type '486 on. The interface requires a simple operating voltage (no split power supply). The motor may either be controlled by hand with the computer keyboard or via a program with an automatic program flow which has been written before.
By means of an interface switch (M108) it is possible to operate up to 4 step motors at the same time via individual step motor interfaces respectively.
Diskette 3.5" is enclosed.

Technical data:

• Operating voltage: approx. 5...18V DC voltage, depending on the connected motor (in any case 1V more than the motor requires)
• Motor connection: 1 unipolar stepper motor 6 connections 4...17V max. 2A
• Connector: 25 poles for connection to the PC printer port LPT1
• Dimensions: approx. 120 x 50 x 24 mm

Price group: 10

Download of the control software:

• m109d.exe for DOS
• Stepper17.zip for WIN9x, WIN2K, WINXP

Available accessories:

• 4-fold Interface switch M108
• Mini-stepper motor "42SPM-24DJA" P5339

<< previous item

description (PDF)

questions to the item

next item>>

You are the visitor no. of this page.