M106

Stepper motor-interface 4 pin

...for controlling a 4-lane bipolar stepper motor 3...17 V, max. 2 ampere. A double power pack (split power supply) is required for the current supply. For connection to a standard AT-PC from type '486 on. The motor may either be controlled by hand with the computer keyboard or via a program with an automatic program flow which has been written before.
By means of an interface switch (M108) it is possible to operate up to 4 step motors at the same time via individual step motor interfaces respectively.
Diskette 3.5" is enclosed.

Please notice the article "Step by Step" from the german magazine "Electronic Actuell Magazin" no. 5/99.

Technical data:

• Operating voltage: 4...18 V split power supply. Double DC voltage, dependent on the connected motor (always 1 V more than the motor requires).
• Motor connection: 1 bipolar stepper motor 4 connections 3...17 V max. 2 A
• Connector: 25 poles for connection to the PC printer port LPT1
• Dimensions: approx. 120 x 50 x 24 mm

Price group: 10

Download of the control software:

• m106d.exe for DOS
• Stepper17.zip for WIN9x, WIN2K, WINXP

Available accessories:

• 4-fold Interface switch M108
• Stepper motor "Berger RDM57" P5108
• Mini-stepper motor "RDM37" P5110
• Stepper motor "AEG S026/48-4 pin" P5111
• Stepper motor "AEG S026/48-4 pin" P5111_15
• Stepper motor "Siemens 1BC 2720-68N" P5113
• Mini-stepper motor "AEG S021/24" P5337
• Stepper motor "SAIA 10 Ohm" P5338
• Micro-stepper motor, oval mounting plate P5341
• Micro-stepper motor, rectangular mounting plate P5342

<< previous item

description (PDF)

questions to the item

next item>>

You are the visitor no. of this page.