HOME
SEARCH
KITS
MODULES
DEVICES
CASES
ASSORTIMENT
ACCESSORIES
PRICELIST
DOWNLOAD
CONTACT
BACK

M087

LED tester

Picture of M087

With the aid of this test module it is made possible to carry out tests with all kinds of light emitting diodes in order to check function, brightness, colour and polarity. The LED's could be tested optionally with following currents: approx. 1mA, 2.5mA, 5mA, 10mA, 20mA and 50mA. It is feasible to insert into the test contacts brand-new LED's as well as soldered out LED's with residual soldering tin at the connecting pins. In order to facilitate selection of LED's of equal brightness, there have been placed two test sockets with the same currents (10mA) side by side. Necessary: battery 9V.

Technical data:

  • Operating voltage: 9V battery
  • LED-connection: contact eyes
  • LED-testing currents: optional 1, 2.5, 5, 10, 20, 50mA
  • Dimensions: approx. 58 x 44 x 25 mm

Price group: 4

<< previous item description (PDF) questions to the item next item>>

You are the visitor no. of this page.