Kit selection - page 9

For further information, please click on the item number

B195 Infrared detector
With the aid of this circuitry it is made possible to carry out functional tests of infrared remote controls.

B197 Relay card 12V=
This relay card could be released with weak signals from approx. 5mA upwards and will then switch a relay with a heavy current contact of 3 Ampere.

B198 Alarm display
In this alarm display have been fitted 2 different coloured light emitting diodes, which flash alternatively in short sequences.

B199 Antenna amplifier approx. 50...1.000 MHz
Single-stage antenna amplifier, with continuously adjustable amplification up to max. 15dB.

B200 Luminous letters
With this kit it is made possible to mount any capital letter of the alphabet or any digit from 0...9.

B201 Running light 10 channels 12V= for small incandescent bulbs 12V= max. 100mA
You may connect small incandescent bulbs or light emitting diodes up to a total output of 100mA per channel.

B202 LED running light - 10 channels
Electronic running light with 10 light emitting diodes.

B203 Power supply approx. 1,2...18V, max. 10A
Electronical adjustable high-power supply. Adjustable from approx. 1,2V to 18V.

B204 Flash-LED 230V~
Flash circuit with one red light emitting diode Ų 5 mm which can be operated directly at 230V~.

B206 Luminous letter control
...switches luminous letters or lamp groups slowly one after another on, keeps all letters switched on for a while and switches off all letters at the same moment.

B207 Steamer noise with steam whistle + steam bell
...produces very life-like the wheezing and hissing of a steamer. Furthermore a steam whistle and steam bell may resound.

B209 LED series printed circuit board 230V~
LED signal lamp which can be directly operated at 230V~.

<< previous page 1 2 3 4 5 6 7 8 9 10 11 next page >>

You are the visitor no. of this page.